2026 Nissan Armada Tire Size
The 2026 Nissan Armada uses different sizes front and rear: 275/60R20 at the front and 275/60R20 at the rear. Recommended cold pressure: 33 to 35 psi depending on size.
Not sure which one you have? Read the size off your tire's sidewall, or check the label on the driver's door jamb. How to read a tire size.
✓ From the manual ·2026 Nissan Armada owner's manual, p. 577
Factory tire sizes
- Width
- 265 mm (10.4 in)
- Wheel
- 18 in
- Overall diameter
- 32.6 in
- Cold pressure
- 35 psi
- Load index
- 116 (2,756 lb)
- Speed rating
- H (up to 130 mph)
- Width
- 275 mm (10.8 in)
- Wheel
- 20 in
- Overall diameter
- 33 in
- Cold pressure
- 35 psi
- Load index
- 115 (2,679 lb)
- Speed rating
- H (up to 130 mph)
- Width
- 275 mm (10.8 in)
- Wheel
- 22 in
- Overall diameter
- 32.8 in
- Cold pressure
- 35 psi
- Load index
- 111 (2,403 lb)
- Speed rating
- H (up to 130 mph)
- Width
- 275 mm (10.8 in)
- Wheel
- 20 in
- Overall diameter
- 33 in
- Cold pressure
- 33 psi
- Load index
- 115 (2,679 lb)
- Speed rating
- H (up to 130 mph)
- Width
- 275 mm (10.8 in)
- Wheel
- 20 in
- Overall diameter
- 33 in
- Cold pressure
- 33 psi
- Load index
- 115 (2,679 lb)
- Speed rating
- H (up to 130 mph)
Questions
What size tires does a 2026 Nissan Armada have?
The 2026 Nissan Armada uses different sizes front and rear: 275/60R20 at the front and 275/60R20 at the rear.
Which size is on my 2026 Nissan Armada?
Look at the sidewall of one of your tires: the size is the code that looks like 265/70R18. The label on the driver's door jamb also lists the original size and pressure for your exact trim.
What tire pressure does a 2026 Nissan Armada need?
The manual gives 33 to 35 psi depending on size, measured with the tires cold. Check it before driving, and go by the door-jamb label if it differs, because that is set for your exact car.
Can I fit a different tire size on my 2026 Nissan Armada?
Stick to a factory size for your wheel unless a tire shop confirms the swap. A different overall diameter changes speedometer readings and can upset ABS and stability control, and the load index must be at least the original.