2017 Nissan Sentra Tire Size
The 2017 Nissan Sentra uses different sizes front and rear: 205/55R16 at the front and 205/55R16 at the rear. Recommended cold pressure: 33 to 36 psi depending on size.
Not sure which one you have? Read the size off your tire's sidewall, or check the label on the driver's door jamb. How to read a tire size.
✓ From the manual ·2017 Nissan Sentra owner's manual, p. 444
Factory tire sizes
- Width
- 205 mm (8.1 in)
- Wheel
- 16 in
- Overall diameter
- 24.9 in
- Cold pressure
- 36 psi
- Width
- 205 mm (8.1 in)
- Wheel
- 17 in
- Overall diameter
- 25.1 in
- Cold pressure
- 33 psi
- Width
- 215 mm (8.5 in)
- Wheel
- 18 in
- Overall diameter
- 25.6 in
- Cold pressure
- 33 psi
- Width
- 205 mm (8.1 in)
- Wheel
- 16 in
- Overall diameter
- 24.9 in
- Cold pressure
- 33 psi
- Width
- 205 mm (8.1 in)
- Wheel
- 16 in
- Overall diameter
- 24.9 in
- Cold pressure
- 33 psi
Spare tire
- Width
- 125 mm (4.9 in)
- Wheel
- 16 in
- Overall diameter
- 22.9 in
- Cold pressure
- 60 psi
A temporary spare is for short trips at reduced speed, usually no faster than 50 mph. Follow the limit printed on the spare and in your manual, and replace the flat as soon as you can.
Questions
What size tires does a 2017 Nissan Sentra have?
The 2017 Nissan Sentra uses different sizes front and rear: 205/55R16 at the front and 205/55R16 at the rear.
Which size is on my 2017 Nissan Sentra?
Look at the sidewall of one of your tires: the size is the code that looks like 205/55R16. The label on the driver's door jamb also lists the original size and pressure for your exact trim.
What tire pressure does a 2017 Nissan Sentra need?
The manual gives 33 to 36 psi depending on size, measured with the tires cold. Check it before driving, and go by the door-jamb label if it differs, because that is set for your exact car.
Can I fit a different tire size on my 2017 Nissan Sentra?
Stick to a factory size for your wheel unless a tire shop confirms the swap. A different overall diameter changes speedometer readings and can upset ABS and stability control, and the load index must be at least the original.