Toyota / 4Runner Hybrid / 2026
2026 Toyota 4Runner Hybrid Tire Size
The 2026 Toyota 4Runner Hybrid came with 265/70R18 or 265/55R20 tires, depending on the trim and wheel size. Recommended cold pressure: 33 psi.
Not sure which one you have? Read the size off your tire's sidewall, or check the label on the driver's door jamb. How to read a tire size.
✓ From the manual ·2026 Toyota 4Runner Hybrid owner's manual, p. 627, 628
Factory tire sizes
- Width
- 265 mm (10.4 in)
- Wheel
- 18 in · 18 x 7 1/2 J
- Overall diameter
- 32.6 in
- Cold pressure
- 33 psi
- Load index
- 116 (2,756 lb)
- Speed rating
- S (up to 112 mph)
Fitted to: 18-inch tires (type A)
- Width
- 265 mm (10.4 in)
- Wheel
- 20 in · 20 x 8J
- Overall diameter
- 31.5 in
- Cold pressure
- 33 psi
- Load index
- 113 (2,535 lb)
- Speed rating
- V (up to 149 mph)
Fitted to: 20-inch tires (type A)
Spare tire
- Width
- 245 mm (9.6 in)
- Wheel
- 17 in
- Overall diameter
- 31.5 in
- Cold pressure
- 33 psi
- Load index
- 112 (2,469 lb)
- Speed rating
- S (up to 112 mph)
Fitted to: 20-inch tires (type B)
A temporary spare is for short trips at reduced speed, usually no faster than 50 mph. Follow the limit printed on the spare and in your manual, and replace the flat as soon as you can.
Questions
What size tires does a 2026 Toyota 4Runner Hybrid have?
The 2026 Toyota 4Runner Hybrid came with 265/70R18 or 265/55R20 tires, depending on the trim and wheel size.
Which size is on my 2026 Toyota 4Runner Hybrid?
Look at the sidewall of one of your tires: the size is the code that looks like 265/70R18. The label on the driver's door jamb also lists the original size and pressure for your exact trim.
What tire pressure does a 2026 Toyota 4Runner Hybrid need?
The manual gives 33 psi, measured with the tires cold. Check it before driving, and go by the door-jamb label if it differs, because that is set for your exact car.
Can I fit a different tire size on my 2026 Toyota 4Runner Hybrid?
Stick to a factory size for your wheel unless a tire shop confirms the swap. A different overall diameter changes speedometer readings and can upset ABS and stability control, and the load index must be at least the original.