Toyota / Corolla Cross / 2026
2026 Toyota Corolla Cross Tire Size
The 2026 Toyota Corolla Cross came with 215/65R17 or 225/55R18 tires, depending on the trim and wheel size. Recommended cold pressure: 33 psi front, 29 to 30 psi rear depending on size.
Not sure which one you have? Read the size off your tire's sidewall, or check the label on the driver's door jamb. How to read a tire size.
✓ From the manual ·2026 Toyota Corolla Cross owner's manual, p. 447, 448
Factory tire sizes
- Width
- 215 mm (8.5 in)
- Wheel
- 17 in
- Overall diameter
- 28 in
- Cold pressure
- 33 psi front, 29 psi rear
- Load index
- 99 (1,709 lb)
- Speed rating
- H (up to 130 mph)
- Width
- 225 mm (8.9 in)
- Wheel
- 18 in · 18 x 7J
- Overall diameter
- 27.7 in
- Cold pressure
- 33 psi front, 30 psi rear
- Load index
- 98 (1,653 lb)
- Speed rating
- V (up to 149 mph)
Spare tire
- Width
- 155 mm (6.1 in)
- Wheel
- 17 in
- Overall diameter
- 26.8 in
- Cold pressure
- 60 psi
- Load index
- 101 (1,819 lb)
- Speed rating
- M (up to 81 mph)
A temporary spare is for short trips at reduced speed, usually no faster than 50 mph. Follow the limit printed on the spare and in your manual, and replace the flat as soon as you can.
Questions
What size tires does a 2026 Toyota Corolla Cross have?
The 2026 Toyota Corolla Cross came with 215/65R17 or 225/55R18 tires, depending on the trim and wheel size.
Which size is on my 2026 Toyota Corolla Cross?
Look at the sidewall of one of your tires: the size is the code that looks like 215/65R17. The label on the driver's door jamb also lists the original size and pressure for your exact trim.
What tire pressure does a 2026 Toyota Corolla Cross need?
The manual gives 33 psi front, 29 to 30 psi rear depending on size, measured with the tires cold. Check it before driving, and go by the door-jamb label if it differs, because that is set for your exact car.
Can I fit a different tire size on my 2026 Toyota Corolla Cross?
Stick to a factory size for your wheel unless a tire shop confirms the swap. A different overall diameter changes speedometer readings and can upset ABS and stability control, and the load index must be at least the original.