Toyota / Highlander Hybrid / 2014
2014 Toyota Highlander Hybrid Tire Size
The 2014 Toyota Highlander Hybrid came with 245/60R18 or 245/55R19 tires, depending on the trim and wheel size. Recommended cold pressure: 35 psi.
Not sure which one you have? Read the size off your tire's sidewall, or check the label on the driver's door jamb. How to read a tire size.
✓ From the manual ·2014 Toyota Highlander Hybrid owner's manual, p. 538
Factory tire sizes
- Width
- 245 mm (9.6 in)
- Wheel
- 18 in · 18 x 7 1/2 J
- Overall diameter
- 29.6 in
- Cold pressure
- 35 psi
- Load index
- 105 (2,039 lb)
- Speed rating
- T (up to 118 mph)
- Width
- 245 mm (9.6 in)
- Wheel
- 19 in · 19 x 7 1/2 J
- Overall diameter
- 29.6 in
- Cold pressure
- 35 psi
- Load index
- 103 (1,929 lb)
- Speed rating
- T (up to 118 mph)
Spare tire
- Width
- 165 mm (6.5 in)
- Wheel
- 18 in · 18 x 4T
- Overall diameter
- 29.7 in
- Cold pressure
- 60 psi
- Load index
- 107 (2,150 lb)
- Speed rating
- M (up to 81 mph)
A temporary spare is for short trips at reduced speed, usually no faster than 50 mph. Follow the limit printed on the spare and in your manual, and replace the flat as soon as you can.
Questions
What size tires does a 2014 Toyota Highlander Hybrid have?
The 2014 Toyota Highlander Hybrid came with 245/60R18 or 245/55R19 tires, depending on the trim and wheel size.
Which size is on my 2014 Toyota Highlander Hybrid?
Look at the sidewall of one of your tires: the size is the code that looks like 245/60R18. The label on the driver's door jamb also lists the original size and pressure for your exact trim.
What tire pressure does a 2014 Toyota Highlander Hybrid need?
The manual gives 35 psi, measured with the tires cold. Check it before driving, and go by the door-jamb label if it differs, because that is set for your exact car.
Can I fit a different tire size on my 2014 Toyota Highlander Hybrid?
Stick to a factory size for your wheel unless a tire shop confirms the swap. A different overall diameter changes speedometer readings and can upset ABS and stability control, and the load index must be at least the original.